FUNCTIONS
PLUS/MINUS CONTROL
Control of sample’s mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
PERCENT WEIGHING
Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.
TOTALIZING
Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
PARTS COUNTING
Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
INTERNAL BATTERY
PEAK HOLD
GLP PROCEDURES
ANIMAL WEIGHING
Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
ALIBI MEMORY
“ALIBI” memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
DATASHEET
Maximum quantity of verification units | 6000 e |
OIML Class | III or IV |
Display | LCD (backlit) |
Protection class | IP 43 |
RS232 Interface | 1× standard, 1× option |
Wi-Fi® Interface | 1× standard |
Power supply | 100 ÷ 240 V AC 50 / 60 Hz |
Power supply | detachable adapter, akumulatory NiMH 6×AA |
Optional power supply | 12V DC and battery |
Operation time on batteries | max 7h |
Maximum quantity of divisions from converter | 838 860 ×10 |
Maximum increase of signal | 19.2 mV |
Minimum volatge per verification unit | 0.4 µV |
Maximum voltage per verification unit | 3.25 µV |
Minimum load cell impedance | 50 Ω |
Maximum load cell impedance | 1200 Ω |
Load cell excitation voltage | 5V DC |
Connection of load cells | 4 or 6 wires + shield |
Operating temperature | -0,25 |
°C | |
Storage temperature | -0,2 |
°C | |
Relative humidity | 10% ÷ 80% RH no condensation |
Keypad | microswitch |
Number of buttons | 5 |
Housing | ABS plastic |
Device dimensions | 181×136×60 |
mm | |
Packaging dimensions | 220×190×90 |
mm | |
Net weight | 00.06 |
kg | |
Gross weight | 01.02 |
kg | |
Multiple range | 1 or 2 ranges |
Additional LCD display | WD-4/1 (option) |
COMPATIBLE WITH
- Waterproof stainless steel platforms
- Mild steel powder coated weighing platforms
- Mild steel powder coated weighing platforms
- Scales Editor 2.0
- RW Tool
- R Panel
- R – LAB
- RAD-KEY
- RADWAG Connect
- RADWAG Development Studio
- labVIEW Driver
- Receipt Printer
- Label Printers
- RS 232, RS 485 Cables
- RS 232 cables (scale-EPSON Printer)
- Moxa Uport 1110 Converter
- Cigarette lighter receptacle power supply cables
- AP2-1 Current Loop Unit
- Barcode Scanners
- Stands, wall mounting kits and mounting brackets
- Displays