Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Control of sample’s mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.
Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
“ALIBI” memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
|Maximum capacity [Max]||25 kg|
|Minimum load||5 g|
|Preload range||2.5 kg|
|Readability [d]||0.1 g|
|Tare range||-25 kg|
|Minimum weight (USP)||82 g|
|Minimum weight (U=1%,k=2)||8.2 g|
|Repeatability (Max)||0.1 g|
|Repeatability (5% Max)||0.04 g|
|Stabilization time||3 s|
|Display||5″ graphic colour|
|Communication interface||2×RS232, USB-A, USB-B, Ethernet, Wi-Fi®|
|Power supply||100 ÷ 240 V AC 50 / 60 Hz|
|Power consumption max.||0.5 A|
|Operating temperature||+10 ÷ +40°C|
|Weighing pan dimensions||350×260 mm|
|Packaging dimensions||520×520×280 mm|
|Net weight||11 kg|
|Gross weight||13.2 kg|
- Granite Antivibration tables
- Antivibration tables for laboratory balances
- Antivibration tables for industrial scales
- E2R System
- RADWAG Connect
- RADWAG Development Studio
- labVIEW Driver
- Receipt Printer
- Cigarette lighter receptacle power supply cables
- RS 232, RS 485 Cables
- IN/ OUT Cables
- RS 232 cables (scale-EPSON Printer)
- Protective Cover for Balances
- Barcode Scanners
- AP2-1 Current Loop Unit
- Stands, wall mounting kits and mounting brackets
- Power Adapters